Znen Classic 150 Moped parts (ZN150t-E)

Znen Classic 150 Moped (ZN150T-E)

Znen 150cc Moped, Model ZN150T-E (We have some body panels for this model, just ask.)

Znen Classic 150T-E Chrome Left Cable Lever Assembly $35	Znen Classic 150T-E Front Disc Rim (2.5X10) $79	Znen Classic 150T-E Rear Drum Rim (2.5X10) $79
Znen 150T-E Chrome Right Master Cylinder w/Lever $44	Znen Classic 150T-E Rear Brake Shoe (4 1/8 Diameter) $18	Znen Classic 150T-E throttle (Gas) Cable (89 inch) $15
Znen Classic 150T-E Odometer Drive $20	Znen Classic 150T-E Front Shock Set (11 1/8 inch, eye to eye: 10 1/4 inch) $79	Znen Classic 150T-E Rear Shock Set (13 3/4 inch, eye to eye 12 3/4 Inch) $79
Znen Classic 150T-E Odometer Cable (41 1/2 Inch) $16	Znen Classic 150T-E Lock Set $48	Znen Classic 150T-E Front Signal Light Left $16, Right $16, Set $30
Znen Classic 150T-E Front Fork $65	Znen Classic 150T-E Seat $75	Znen Classic 150T-E Wire Harness $45
Znen Classic 150T-E After Market Windshield $75	Znen Classic 150T-E Front Disc Brake $95	Znen Classic 150T-E Front Axle (12mm, 11 1/8 inch Long) $8
Znen 150T-E Rear upper Chrome Moulding $40	Znen 150T-E Tail Light (Tall Bracket version) $45	Znen 150T-E Tail Light (Short Bracket version) $45
Znen 150T-E Gauge Assembly $59	Znen Classic 150T-E Disc Brake Rocker $16	Znen 150T-E Head Light Cover $20
Znen 150T-E Headlight Round Chrome Cover $10	Znen 150T-E Head Light Bracket $4	Znen Classic 150T-E Head Lamp (6 Inch Diameter) $40

Maximum Speed 90Km/h (55.0 mph) Fuel Capacity 1.27 gallon Brake Type Front ABS Disc, Rear Drum Engine Type 4-stroke, Single, air cooled 150cc motor. Tire size 3.5-10, 3.5-10 Battery 12V/9ah Starting System Electric/Kicks
*AKA: Heritage 150/50,* Roketa Scooter - MC-16T-150 , Flyscooters 2006 classic-vintage looking Il Bello, Imitation of Honda Joker**

Znen 150T-E Front Rotor (59mm center hole, 189mm diameter, 3mm thick) $30	Znen 150T-E Front Fender $48	Znen 150T-E Kick Stand $16
Znen Classic 150T-E Chrome Left Cable Lever $14	Znen Classic 150T-E Chrome Hydraulic Brake Lever (Right) $14	Znen Classic 150T-E Front Axle Bushing (1 3/4 inch long) $4
Znen 150T-E Right Switch (5-Pin Plug, 2Loose Wire) $20	Znen 150T-E Left Switch (8Pin Plug) $20	Znen 150T-E Break Light Lens $12
Znen 150T-E Rear Rack $42	Znen 150T-E Handle Bar $35	Znen 150T-E Right Speed Controller $16, Left Grip $12, Set $28
Znen 150cc 150T-E Classic Muffler $120	Znen 150T-E Rear Lower Chrome Moulding $40	Znen 150cc Head $58

|| Show All Gas Scooter Parts Page 2 | Show All Electric Scooter Parts Page 2 | Find Gas Scooter Parts by Scooter Style| Find Electric Scooter Parts by Scooter Style|

order@ScooterParts4Less.com| | Order Info | Technical Tips |

Znen GY6 150cc CDI $23	Znen 150cc CVT Black Cover (Long Version) (fits only the Znen brand of Mopeds)$60	Znen 125cc/150cc Head Cover (fits only the Znen brand of Mopeds) $36	Znen 150cc Timing Chain Guide set (fits only the Znen brand of Mopeds)$12	Znen 150T-E Back Seat Pad $16	Znen 150T-E Floor Mat Plate set $24
Znen 150cc CVT Cover Gasket (Short Version) (fits only the Znen brand of Mopeds) $7	Znen 150cc CVT Cover Gasket (Long Version) (fits only the Znen brand of Mopeds) $7	Znen 150cc Rocker Arm Holder (fits only the Znen brand of Mopeds) $24	Znen 150cc CVT Silver Cover (Long Version) (fits only the Znen brand of Mopeds)$60	Znen 150cc Crankshaft (fits only the Znen brand of Mopeds) $69	Znen 150cc Camshaft (fits only the Znen brand of Mopeds)$24
Znen 150cc 12-Coil Magneto Housing (fits only the Znen brand of Mopeds) $36	Znen 150cc Cylinder Kit (fits only the Znen brand of Mopeds) $79	Znen 150cc Timing Chain (11 inch, 90 Link) (fits only the Znen brand of Mopeds) $12	Znen 150cc Ignition Coil (fits only the Znen brand of Mopeds) $24	Znen 150cc Ignition Coil (1-prong version) for Znen Brand Motor $24	Znen GY6 150cc Scooter 12-coil Stator (29mm center hole diameter, 42mm diagonal bolt hole spacing) (fits only the Znen brand of Mopeds)$38
Znen 150cc Variator (Pulley) (fits only the Znen brand of Mopeds) $40	GY6 cvt belt (835-20-30) $35	GY6 150cc Cylinder Gasket $8	GY6 150cc Piston Rebuilt Kit (57mm diameter, 15mm wrist pin) $37	GY6 125cc/150cc CamShaft (34 tooth) $28	GY6 50cc Piston Rebuilt Kit $35
GY6 150cc AirBox Assembly $48	GY6 150cc Head Bolt each $4, or $13 for set	GY6 125/150cc Turbo Fan $29	GY6 125cc/150cc Red Cooling Fan $20	GY6 125cc/150cc HP Clutch Drum (Bell) $49	Znen 150T-E Right Switch (6-Pin Plug, 3 Loose Wire) $20
Moped Stock Fuel Filter $2.50	GY6 125cc to 150cc Starter $51	GY6 Fuel Valve $16	GY6 125cc/150cc Stock Variator (Pulley) $45	4-stroke Carburetor Bowl Gasket $2.70 each	GY6 150cc Valve Cover Gasket $3
GY6 125cc/150cc motor Stock Ignition Coil $25	GY6 125/150cc Manifold (30mm diameter rubber part, 22mm diameter metal intake) (1 outlet) $15	GY6 125/150cc Manifold (30mm diameter rubber part, 22mm diameter metal intake) (2 outlet) $15	GY6 125cc/150cc manifold (rubber part 30mm diameter, metal intake 22mm diameter) (2 outlet, Extended Version) $20	GY6 125cc/150cc Valve Assembly $26	GY6 Moped 150cc Discharge Resistance $20
GY6 150cc Oil Pump Chain $10	GY6 125cc/150cc Timing Chain Guide set $10	GY6 125cc to 150cc Carburetor: 24mm outside, 32mm outside, 38mm air filter Intake $68	GY6 150cc Piston Rings set (57mm) $12	Znen 150cc Chain Tensioner (fits only the Znen brand of Mopeds)$16	GY6 125cc/150cc Vacuum Fuel Pump (stock) $30
GY6 150cc Gasket set $20	Electric Choke for GY6 125cc/150cc Carburetors $19	GY6 150cc Starter Clutch Assembly (50Tooth) $36	GY6 125cc/150cc Rear Drive Shaft (Version 1) (173mm) $28	GY6 125cc/150cc Rear Drive Shaft (Version 2) (186mm) $28	GY6 Belt (842-20-30) Gates Powerlink $35
GY6 150cc Oil Pump $20	CVK GY6 125cc-150cc Performance Jet Set ver #2 (main jet #115, Idle Jet#38. $9.50	CVK GY6 125cc-150cc Performance Jet Set ver #3 (main jet #122, Idle Jet#42) recommended for big bore kits $9.50	GY6 Stock Spark Plug (50cc to 150cc) $2.50	Brake Switch Wire $3	GY6 125cc/150cc Isolater (23mm center hole, 45mm bolt hole spacing) $4

GY6 150cc Valve set $18	GY6 125/150cc Counter Shaft Gear $40	GY6 125cc-150cc Final Drive Gear (51Tooth/19Tooth) $20	GY6 Solenoid $14	GY6 125cc-150cc Performance Jet Set ver. #1 $8	GY6 150cc Timing Chain 90 Links (11 inch long) $1
Iridium Performance Spark Plug (CR8HIX) $17	NGK Racking Cable (CR2) $29	GY6 120cc/150cc Kick Starter Idle Gear $20	GY6 Billet Dip Stick (7.8cm) $20	GY6 125cc/150cc CrankShaft (287mm Total Length) $79	orange HP Ignition Coil for GY6 motors 50cc to 150cc motor $29
GY6 125cc/150cc Final Drive Shaft (version 1, 19 Splines, 194mm length, Diameter at Bearing End: 26mm, Diameter at Smooth End: 16mm) $23	GY6 125cc/150cc Final Drive Shaft (version 2, 19 Splines, 196mm length, Diameter at Bearing End: 26mm, Diameter at Smooth End: 16mm) $23	GY6 125cc to 150cc Carburetor: 24mm inside, 32mm outside, 38mm air filter Intake (PD24) $59	GY6 150cc Fan Cover $6	GY6 58.5mm Alloy Big Bore Kit $250	Znen 150cc Rectifier $22
GY6 50cc to 150cc Dipstick (8.2cm long) $8	GY6 150cc Performance Roller Weight set (9g, 10g or 11g set) $20 per set	GY6 125cc/ 150cc Kick Start Gear Shaft (spindle) Version 2, 170mm total length $20	GY6 125cc/150cc Clutch Assembly $65	GY6 125cc/150cc Clutch Drum (Bell) $20	GY6 150cc 57mm Cylinder Kit $76

GY6 Moped 125cc-150cc Performance Muffler (Stainless Steel) $179 Fits all 125cc/150cc that use dual shock in the rear	KOSO HP 28mm Carburetor kit (for GY6 Mopeds) $130	GY6 125cc/ 150cc Kick Start Gear Shaft (spindle) Version 1, 130mm total length $20	4-Stroke Battery (12v,9AH ) Acid Insert style $42	GY6 125cc/150cc Racing Clutch $75	GY6 125cc/150cc HP CamShaft $59
4-Stroke 42mm Shielded Air Filter (fit's GY6 125cc/150cc motors) $20	GY6 50cc-150cc Muffler Screw Set (6mm) $6	Universal CNC Mirror set (fits Moped, SuperBikes, ATVs) comes with 3 different tread screw set $59	GY6 150cc Slider Weight set (11 gram) $20	Battery Strap (5 Inch Long) $2.50	GY6 125cc/150cc Crank Bearing $11
GY6 Mini 3-Way Remote Fuel Valve $13	GY6 125cc/150cc HP Clutch Spring set (1000 RPM) $10	GY6 125cc/150cc HP Clutch Spring set (1500 RPM) $10	GY6 125cc/150cc HP Clutch Spring set (2000 RPM) $10	GY6 125cc/150cc Koso HP Pulley $50	GY6 50cc to 150cc 30.50mm Exhaust Gasket $2
GY6 150cc Clutch Shoe Set $25	GY6 150cc Slider Weight set (13 gram) $20	GY6 150cc Slider Weight set (14 gram) $20	GY6 Mini 4-Way Remote Fuel Valve	GY6 150cc Slider Weight set (12 gram) $20	Repair Kit for GY6 125/150cc Carburetor $16
Znen Fuel Lever Sensor (Fuel Level Sending Unit) $22	GY6 Kick Starter (Flat Pedal Version) $16	Znen Neck/Bearings (Set of 7 - 50mm, 44mm, 43mm, 43mm, 40mm, 36mm, 31mm) $16	TreadLocker (Med Strength, 50 Gram)	4-Stroke Fuel Line $2.50 per Foot	Kenda 3.5-10 Dot Moped Tire $46
	GY6 125cc/150cc Variator V-Slide set $3.80		Moped Orange Round Reflector $4	GY6 Fuel Valve $12	GY6 Moped 150cc High Performance Muffler (Matte Black Finish) w/ Sound Adjust $210
Moped Chrome Mirror Set (10mm) $40	Cheng Shin CST 3.50-10 Dot Moped Tire $46	Moped Chrome Round Mirror Set (8mm) $28	Moped Chrome Mirror Set (8mm) $40	4-Stroke Performance Fuel Line (Yellow or Green) $8	Moped Red Rectangle Reflector $4
Moped Kill Switch (4 Wire Plug) $5	Moped Horn Switch (2 Wire Plug) $5	Moped Passing Switch (4 Wire Plug) $5	Moped Turn Signal Switch (6 Wire Plug) $5	Moped Light Switch (6 Wire Plug) $5	Moped Starter Switch (2 Wire Plug) $5
	Break Hose Screw 10mmx29mm $2	Moped Right Master Cylinder With Lever and Mirror Holder (Skinny, Black color) 53mm L X 69mm H X 27mm W $30	Tire Popper Tool $38	GY6 Kick Starter (Round Pedal Version) $14	Moped High/Low beam switch 3- Wire Plug) $5
Moped Blank Key set ( Ver. #1) $5	Moped Blank Key set ( Ver. #2) $5	Moped Blank Key set ( Ver. #3) $5	Moped Blank Key set ( Ver. #4) $5	Moped Blank Key set: foldable ( Ver. #5) $5	ABS Upgrade (10mm tread) $16
Wire Tie (30 set) $2, 300 set $14	GY6 39mm Crank Tool $16	GY6 50cc-250cc Clutch Tool(39mm/41mm) $24	Universal Flywheel Puller (for Moped, ATV, & Dirt bikes) $29	Bearing Puller kit $40

border=0>